E-PACT Module 2 Test 1 Practice

These questions are part of the practice quiz. Start practicing

• Who verifies that completed test results for controlled work fully satisfies test requirements and initiates corrective action if they don't?
• Where is an EEBD typically stored?
• Who is authorized to sign individual PQS line items?
• Which document provides a detailed procedure for performing maintenance?
• What procedure is used to assess spaces under heat stress conditions?
• Which groups does the PQS program authorize for qualifications?
• Which statement reflects the correct approach to cooling a heat-exposed person?
• Caution tags are which color?
• When should EEBD stowage cabinets not be marked?
• Which PPE is required when handling synthetic lubricants?
• Which of the following is true about heat injury symptoms?
• What range do small micrometers typically have?
• Which tool is used to smooth a rough edge on a metal workpiece after cutting?
• True or False: The PMS schedule is used to verify that the MRC is up to date.
• Which condition results from heat exposure involving loss of the body's heat balance?
• Which tool is used to cut internal threads in a hole?
• Which center coordinates damage control on the ship?
• Who are non-crew members that perform ship maintenance?
• If the tag-out will affect the ship's damage control capabilities, who must you notify?
• Which PPE is described as splash resistant?
• PHEL curves indicate what aspect of workplace conditions?
• When handling fluids, which eye protection is specified?
• What is the first step when discovering a HAZMAT spill?
• What color are danger tags?
• You must remove an EEBD from service if there has been any what?
• What should you do if you notice someone is suffering from a heat stroke?
• If tampering is suspected, what is the correct action for an EEBD?
• Which technical publication assists sailors in the maintenance of ships with detailed administration and instructions?
• Which PQS book contains Fundamentals?
• How many minutes does an EEBD last in use?
• After completing maintenance, whom do you notify?
• Which OA document is used to record and authorize deviations from technical documents?
• What is the assessment of previously completed maintenance items?
• Who evaluates for sight hazards not previously evaluated?
• Who designates the QAO?
• Which role typically designates the QAO?
• Q-Points are used to indicate a step in a work procedure that must be performed correctly the first time.
• EEBDs in engine rooms are required at what multiple of the number of watchstanders?
• What should be worn when grinding or chiseling?
• Which document would you consult to learn safety precautions related to hazardous materials?
• Which series PQS book covers Watch Stations?
• A second person may accompany the first checker during a tag-out procedure?
• Which document contains the MIP control number used for MRC verification?
• Who is the central point of contact for all PQS matters?
• When disconnecting ship-to-shore sewage, what type of eye protection is used?
• True or False: You use the periodicity code on the LOEP.
• Who ensures the test measuring equipment has current calibration stickers?
• How often is a hearing test conducted?
• What color is the case of the actual EEBD?
• What tag is used to prohibit the operation of equipment?
• PHEL curves are used to determine safe exposure times for what variable?
• Before re-energizing equipment, personnel consult which technical document to verify correction conditions?
• What heat stress injury is indicated by hot, dry skin and bizarre behavior?
• What type of action prevents the equipment deterioration?
• Who directly supervises the administrative portion of the 3-M program?
• Which gloves are used when handling sharp objects?
• What IEM status is the equipment in if it remains onboard, not scheduled for corrective maintenance or overhaul?
• Which IEM status indicates equipment to remain onboard and not scheduled for corrective maintenance or overhaul?
• Face shields protect from which hazards?
• Who authorizes the removal of tags?
• Whom should you inform immediately upon discovering a hazmat spill?
• Which item is an example of skin protective PPE?
• What technical document does a person look at to ensure correction conditions?
• Which statement about treating heat exposure is incorrect?
• Which color pairing correctly describes the real and training EEBD cases?
• Which crew member is responsible for hazmat training?
• How are heat cramps primarily treated?
• What does MRC stand for in maintenance documentation?
• Which tool is used to cut internal threads on an object?
• When special instructions are required what tag must be used?
• Which role maintains the PQS signer roster?
• Which entity is primarily responsible for applying quality checks within a work center?
• What tool would you use when shaving a piece of metal?
• Which symptom best indicates heat stroke?
• Who is responsible for the issuing and removal of tags?
• A torque wrench is used to measure what?
• What should you not do with an EEBD?
• When a problem is discovered in the MRC, what should you submit?
• What does the PMS provide?
• Who oversees the HAZMAT program at a ship?
• What is the primary purpose of Navy Ships Technical Manuals (NSTMs)?
• To treat heat exposure, immersing the victim in cold water is recommended.
• Which title best describes the content of the Series 300 PQS books?
• Who reviews and approves a formal work package?
• Which instrument is associated with reading dew point in the air?
• When handling fluids, what type of eye protection is required?
• Where is the list of materials required to perform maintenance located?
• Torque wrenches are what type of measuring device?
• Rubber aprons and coveralls are examples of what type of PPE?
• What does the acronym DIVO stand for?
• Which tool would you use to form a metal piece into a rounded end by hammering?
• What does the PQS program define to be the minimum skills necessary to stand watches and perform duties?
• Which tag color is used to indicate an out-of-calibration condition?
• Where is an EEBD typically stored?
• Out of Cal tags are which color?
• Which technical publication provides information on the ship's engineering plant systems?
• Which tool is used to remove small amounts of metal to create a smooth surface?
• Who makes up the weekly PMS schedule?
• Which role is responsible for initiating corrective action when test results do not meet requirements?
• Which form is used to authorize the start of work on all ships systems and equipment by activities other than the Ship's Force?
• Which statement best describes the PMS in relation to the 3-M system?
• While performing a tag-out audit what must you verify?
• What does the LCPO do for the PQS program?
• What type of thermometer reads the dew point of the air?
• Which statement best describes the Unit Coordinator's role in PQS management?
• Who must wear protective eyewear properly?
• If a hazard can harm personnel or equipment, what type of tag must be used?
• What instruction provides tag-out standards?
• What should you use an EEBD for?
• What is an emergency?
• Which tag is used to identify and trace controlled materials?
• Double hearing protection comprises two devices. Which combination is correct?
• What color are caution tags?
• Eye wash station maintenance is the responsibility of which role?
• Who coordinates and administers the QA program in their respective work center?
• Who is overall responsible for the establishment of a sight conservation program?
• PHEL curves provide information about safe durations under varying workloads. Which option best describes this?
• Who maintains the list of qualified PQS signers?
• What PPE should be worn when working with synthetic lube oil?
• What is the routine action performed at watch stations?
• What types of pliers are best used for working in tight spaces?
• What is the purpose of PQS?
• In the maintenance documentation chain, which document comes after MRC?
• Which program is designed to manage materials and resources?
• Who determines if tag-outs require the CO's permission?
• What does 3-MC stand for?
• Who verifies that work has been completed by entering initials and signature on all applicable QA forms?
• The dew point is read by which thermometer?
• In port, who is in charge of the tag-out log?
• When forming a piece of metal what type of tool would you use?
• Which role is responsible for checking and signing qualifications within the PQS program?
• Which PQS book covers Systems?
• Is it permissible to use a spliced power cord?
• Which document contains the list of materials required for maintenance tasks?
• What is the correct action if an EEBD shows signs of tampering?
• Who is in charge of the tag-out log while underway?
• Which PQS book is associated with Fundamentals?
• Which of the following is true about heat injury symptoms?
• Which eye protection is specified for grinding or chiseling tasks?
• Who do you report all tag-out discrepancies to?
• What type of hearing should be worn in conjunction with double hearing protection?
• Which document provides tag-out standards?
• Which heat-related condition results from overexposure to heat stress and involves a total breakdown of the body's heat balance?
• Level 1 materials must be closely tracked and controlled by who?
• What impact can a wet bulb temp have on stay times?
• How do you verify the MRC?
• Who ensures maintenance is completed on eye wash stations?
• Which factor directly affects how long a worker can stay in hot conditions according to guidelines?
• Where are the ship's overall dimensions described?
• Who is responsible to ensure personnel have signed and followed the TUM?
• Who authorizes the removal of tags?
• Who maintains the LOEP?
• What type of PPE must be splash resistant?
• Who is the final qualification authority?
• What does the acronym SDS stand for?
• Which sign is most consistent with heat stroke?
• Double hearing protection consists of two devices. Which are they?
• You must securely seal all containers with hazmat.
• Where can you find all safety precautions listed?
• If there is an impact noise of 143 dBA, what hearing protection is required?
• Where could you find an SDS?
• What color is the case for training EEBDs?
• What material is the EEBD mask made of?
• If there are 10 watchstanders in the engine room, how many EEBDs should be present?
• Which of the following is a hallmark sign differentiating heat stroke from other heat illnesses?
• What term describes the minimum skills required to stand watches?
• What is the direct responsibility of a safety officer?
• What is conducted on spaces that are under heat stress conditions?
• EEBDs in engine rooms should be provided at what percentage of the baseline number of watchstanders?
• Face shields are designed to protect against which hazards?
• Which OA document would you reference to authorize a deviation from an engineering spec?
• What is the service life of an EEBD?
• The indicator needle should be on what color before use?
• Which tag color indicates danger?
• The PQS program is designed to provide qualifications to perform specific duties for which groups?
• What must you inspect on hoods and helmets to ensure breathing remains unobstructed?
• Who is primarily responsible for authorizing tag-out usage and removal?
• Who can authorize changes made to the work center's quarterly schedule?
• What is the correct order of the maintenance documentation chain from start to end?
• What tool would you use to measure small holes?
• What is the maximum number of extension cords you can connect together?
• What instrument measures air moisture content?
• Where should HAZMAT be stored?
• During a tag-out audit, which statement is true?
• What gloves are used when working with sharp objects?
• What type of saw is used for cutting through a piece of metal?
• Who can extend stay times?
• How often do tag-out audits occur?
• True or False: The maintenance documentation chain is MRC -> MIPS -> LOEP -> ROC.
• What is used to indicate a step in a work procedure that must be performed correctly the first time and requires close supervision?
• Where should hazmat and related safety data materials be stored?